Store auswählen
Sprache

DBX ZonePro 1261

Bewertung:
0

DBX ZonePro 1261

Article:
5931761
CHF 829.00 inkl. MwSt.
-
-
Swipe for 1 additional image

Produkt Details

Beschreibung

With 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO® 1261 is the newest members of the ZonePRO® family providing a complete suite of signal processing and control for Commercial Audio applications.

 

Designed to offer superior system sonic performance and flexibility, the 1261/1261 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1261 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.

 

Beyond processing, the ZonePRO® products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.

The ZonePRO® 1261 will take your Commercial Audio system to the next level with advanced processing, versatility and control.

 

Advanced Feedback Suppression (AFS™)

Autowarmth®

Auto Gain Control

Compression

Limiting

Noise Gating

Notch Filtering

Bandpass and Crossover Filters

Parametric EQ

Security Lockout

Wall Panel Control

RS-232 Control

IEC, UL and CSA Approvals

 

Specifications

Input 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF

Input Connectors Euroblock (Line and Mic) RCA (Source)

Input Impedance Euroblock > 50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA >25kΩ Unbalanced, RF Filtered

Max Input +20dBu Mic/Line, +12dBu RCA

CMRR > 40dB, typically >55db @ 1kHz

Mic Preamp gain 30 to 60dB

Mic Preamp Equivalent Input Noise (EIN) <-118dB

Mic Preamp Phantom Power 15V

Output 6 Analog

Output Connectors Euroblock

Output Type Electronically balanced, RF filtered

Output Impedance 120 ohms balanced, 60ohm unbalanced

Max Output +20dBu

A/D Converter dbx Type IV™ conversion system

A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted

Type IV Dynamic Range >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW

Sample Rate 48kHz

D/A Dynamic Range 112 dB A-weighted, 109dB unweighted

Dynamic Range >110 dB A-weighted, >107dB unweighted

THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response 20Hz - 20kHz, +/-0.5dB

Interchannel Crosstalk >80dB typical

Propagation Delay 0.6 msec

Operating Voltage 100-240 VAC, 50/60Hz

Power Consumption 27 W

Unit Weight 6.8 lbs.(3.1 kg)

Shipping Weight 8.8 lbs. (4.0 kg)

Dimensions 1.75” H x 5.75” D x 19” W

Safety Agency Certifications UL 60065, IEC 60065, E 60065, EN 55013

Garantie
3 Jahre BringIn Garantie gemäss AGB.
Zahlung, Lieferung, Rücknahme
  • Dieser Artikel wird speziell für Sie bestellt oder kann aus anderen Gründen nicht storniert, umgetauscht oder retourniert werden.
  • Kann nicht per Nachname bestellt werden
  • Zahlung bei Abholung nicht möglich, Artikel muss bei Bestellung bezahlt werden.
Spezifikationen
Mehr Informationen
Marke DBX
Bewertungen
Eigene Bewertung schreiben