- HV-3 Mikrofon Vorverstärker Modul
- Variables Gain von 14.5 bis 60dB (70dB Ribbon Mode)
- Frontpanel Instrument Input
- Ribbon Microphone Mode mit 10dB Gain Boost
- 80 Hz Highpass Filter
- 48V Phantom Power
- 15dB Pad
- Phase Reverse
- Frequenzgang von <10 Hz - >200 kHz
Randy Poole - Pro Audio Review
"The HV-35 was consistently in my top two for all tests with the Radial Workhorse chassis. In comparison to transformer-based Class-A designs, it was more open on the top with less compression of transients and a more detailed sense of ambience and space. Compared to some of my favorite tube-based pres, the HV-35’s low end was punchier and thicker. The HV-35’s high end was accurate and pleasing, while in comparison the tube pre’s additive harmonics and softening of transients felt quite flattering on acoustic guitar. Overall, the timbre of the HV-35 was more balanced than all of its tested counterparts, and its placement in the stereo field was more “three-dimensional."
Minimum Gain: 14.5 dB, 1dB with Pad
Maximum Gain: 60 dB (70 dB in Ribbon Mode)
Frequency Response: (-3 dB) < 10 Hz to > 200 kHz
typical -1.0 dB @ 10 Hz
typical -1.5 dB @ 200 kHz
Noise (60 dB Gain, 10 Hz - 30 kHz) -130 dB EIN
THD + Noise (10 Hz - 20 kHz, +24 dBu Out): < .003%
Typical < .001%
IMD (50 Hz & 7 kHz) 35 dB Gain < .0006% +12 dBu Out
<.001% +20 dBu Out
Phase Response: < 2 degrees deviation
CMRR (10 Hz - 20 kHz bandwidth, 100 mV C.M.) > 65 dB
Typ > 85 dB
Slew Rate: > 25 Volts per microsecond
Maximum Input Level: +12dBu @ 0.02% THD+N
Maximum Output Level, THD+N: < 0.001% at +26dBu output
< 0.05% @ +28 dBu output
Phantom Input Impedance: (1 kHz) 2,210 ohms
Output Impedance: 24.3 Ohms (x2)
Phantom Powering: provided by 500 rack
Dimensions/Shipping: 1.5” W x 5.25” H x 6” D
Shipping Weight: 2 lbs.
Marke | Millennia |
---|